RS485 Hubs, RS485 Splitters, Isolated RS485 Hubs, IoT Front-End Acquisition, DC Motor Drivers, Stepper Motor Drivers

Home > Products > Product List > Relay Modules > LK-CK100 RS485 Controller (Encoder)

LK-CK100 RS485 Controller (Encoder)

Controls Pelco-D/Pelco-P PTZ heads and dome cameras - pan and tilt movement plus camera focus, zoom, iris, presets, lights and wipers

Supply voltage: : DC 9-30 V

Power consumption: : 0.1 W

Interface: : RS485

Protocol: : Pelco-D / Pelco-P / proprietary

Baud rate: : 2400-115200 bps

Address: : 0-255

ESD protection: : 15 kV

Operating environment: : inside a sealed enclosure

Operating temperature: : -40 °C to 50 °C

The LK-CK100 converts switch and voltage signals into digital data and sends it over RS485. It can drive Pelco-D/Pelco-P PTZ heads and dome cameras - pan and tilt movement plus camera focus, zoom, iris, presets, lights and wipers - and it can equally be used to read digital and analogue voltage signals over RS485. Address and baud rate are set with DIP switches; joystick type and protocol are set from the PC software.

Manuals & Datasheets Order now